How should LED underwater lights choose the right light color effect? Common underwater lights are red, yellow, white, blue. colorful color, from a professional point of view, is the color temperature of the lamp. Normally for warm white (2800-3000K), natural white (4000-4500K), white (6000-6500K), can also be customized according to the needs of a certain color temperature, red, yellow and blue color will commonly choose to do color, because the choice of color underwater lights are mainly used to render oven atmosphere, rather than just for lighting.
I have a basic understanding of the color/color temperature of the LED underwater light. In fact, the underwater environment is the same as home, restaurant and store. According to different environmental requirements, the appropriate color/color temperature led strip rgb cct manufacturer is selected. Hot spring pools under the water lamp choose warm white (2800-3000K), warm yellow colors can give people a warm and pleasant feeling; for swimming pools, choose natural white or pure white, as the pool's underwater lights are frequently used for lighting; outdoor landscape pool, party pool and so on choose colorful jumping lighting effect, used to render a kind of atmosphere.
LED underwater light color/color temperature to 7000K, 8000K light will turn blue, blue will cause damage to the eyes, need to pay special attention to, if the direct contact with the eyes needs to reasonably control the use time; also, we need to pay special attention to choosing formal certificate qualified manufacturers. Some three no inferior lamps color temperature is not accurate, light color effect is poor, light decay is particularly rapid.
There are a wide range of LED underwater lamps, but they can only be installed underwater as lighting or rendering atmosphere. Underwater lamps are mainly used in swimming pools, diving pools, pools, hot springs, bathing pools, fountains, water parks, fish pools and so on. What characteristics and parameters do you need to understand about choosing LED underwater lamps?
I. Installation of LED underwater lamps
Swimming pools, pools, hot springs, etc., are typically divided into embedded, wall-mounted, sleeve installation, referred to as open and dark installation; fountain usually has a middle hole, bracket installation, relatively easy to choose. Select the appropriate LED underwater lamps according to the actual installation requirements.
2. Common parameters of LED underwater lamps
First of all, the voltage meets the international standard of lower than 36V safety voltage, conventional 12/24V, waterproof level is IP68, that is, the highest level of waterproof test; second: material, commonly divided into stainless steel (304/316), plastic two; third: color temperature is divided into positive white (6000-6500K), natural white (4000-4500K), warm white (2600-2800K), color is divided into monochrome and color (RGB); fourth: the beam Angle is commonly 15/25/30/45/60/120 degrees;
3. Characteristics of LED underwater lights
LED underwater lamps are typically able to withstand atmospheric pressure of 0.2 Mpa (mpa), specially customized to work well in about 20 meters of water, normally used within 5 meters of the water; temperature most of the lamps can withstand -20℃ to 40℃, some of the extreme temperature resistance can reach 50℃; all underwater lights must be used with transformers.
Through the above 3 basic familiar with the characteristics of LED underwater lamps, but in the selection of lamps should pay attention to whether the qualification certificate is complete, work material is real material; whether the waterproof performance technology meets the standard (VDE European standard waterproof power cord, superior quality waterproof rubber ring, lamp body glue, etc.); what brand is the light source? Is the power enough to wattage